Type Approval

Belarus

Considering selling into Belarus

Regulations and compliance requirements can pose challenges to companies who are looking to export their new products in Belarus. Most products entering the Belarusian markets must meet local requirements and product regulations put in place which ascertain that the products and services are safe, of good quality and fit for consumers’ needs.

Ensure that your products successfully meet Belarusian standards by working with a market leader, iCertifi. iCertifi fully understands the local requirements and procedures applicable in Belarus. You can rely on our expertise and knowledge to help you access Belarusian markets efficiently while at the same time, be assured of our objectivity, integrity and professionalism.

Electrical Safety

Regulatory agency

• Customs Union Technical Regulation (CU TR)

Regulations

• On 1 July 2010, the Customs Union (CU) between the Russian Federation, Belarus and Kazakhstan came into force.
• EA Customs Union (EAC) Approval is a singular harmonised Approval Certificate for EMC and/or Safety for certain products. It covers all member states in the union.
• The product must be marked with the EAC Mark.
• There are 2 methods of conformity assessment for electrical products: Certification (CoC) and declaration (DoC). The validity is up to 5 years.

Guidelines

• A local representative is required for DoC.
• Conformity Assessment includes:
  • Submission of application, test reports and essential documentation.
  • Factory inspection report.
  • Quality Management System certification (where applicable).
  • The EAC mark should be shown on the product label.

Applicable product categories

Products with nominal voltage of 50 to 1000 AC and 75 to 1500 DC require CU approval. To determine if a particular product is subject to the above regulations, please contact us.

• Products with nominal voltage of 50 to 1000 AC and 75 to 1500 DC require CU approval. To determine if a particular product is subject to the above regulations, please contact iCertifi

Energy Efficiency

Regulatory agency

• Ministry of Energy of the Republic of Belarus

Regulations

• There are currently no environmental requirements in Belarus. For further enquiries, please contact us.

Telecom & Wireless

Regulatory agency

• The Ministry of Communications and Informatisation of the Republic of Belarus

Regulations

• Type approval of telecommunications facilities is performed by the independent accredited certification body “Giprosvyaz”.
• Type approval of telecommunication facilities can be performed both in the form of declaration and in the form of certification.
• Type approval is performed according to the Law of the Republic of Belarus «On Approval in accordance with technical normative legal acts in standardization» (Law of the Republic of Belarus 31.12.2010 № 228-3)

Guidelines

• The certification process includes submission of an application, product testing in an accredited test laboratory, submission of test report and essential documents. Upon successful approval by the authority, a certification will be issued.

Applicable product categories

To determine if a particular product is subject to the above regulations, please contact iCertifi.com

Brunei

Considering selling into Brunei

Exploring new markets for your products in Brunei? Regulations and compliance requirements can pose challenges to companies who are venturing overseas. Requirements and regulations are put in place to reduce risks of injury, improve quality of life and ensure fit for use. Most products entering the Bruneian market must meet the relevant requirements of the authorities depending on the product scope.

You can ensure that your products successfully meet the Brunei standards by working with a market leader, iCertifi fully understands the local requirements and procedures applicable in Brunei. You can rely on our expertise and knowledge to help you access key markets efficiently, reduce risks, while at the same time, be assured of our objectivity, integrity and professionalism.

Market access information by category

Electrical Safety

Regulatory agency

• Department of Electrical Services (DES, Prime Minister Office)

Regulations

• For registration, products must conform to safety requirements according to standards stipulated by the DES under the Electricity Act.
• Compliance with IEC standards.

Guidelines

• Suppliers registering products should register through the Product Procurement Section.
• Product approval will be endorsed by the Registration Committee upon satisfactory conformity assessment with the provision of quality assurance details, test reports and certification by international test bodies, etc.

Applicable product categories

• To determine if a particular product is subject to the above regulations, please contact us.

Our services at a glance

Energy Efficiency

Regulatory agency

• Energy Labelling and Standards Task Force of Energy Division, Prime Minister’s Office

Regulations

• There are currently no mandatory requirements in Brunei.
• The Energy Labelling Scheme is voluntary for room air conditioners.
• The Energy Label will be issued in the form of a certificate and shall be based on a 5-Star rating scheme.

Guidelines

• Manufacturers who wish to participate in the Energy Labelling Scheme may submit applications for both supplier registration and product registration to the Division.

Applicable product categories

• To determine if a particular product is subject to the above regulations, please contact us.

Our services at a glance

• iCertifi has the experience and capability to support manufacturers in attaining compliance with Bruneian requirements and obtaining the necessary approval. iCertifi can also support manufacturers in obtaining voluntary endorsement labels.

Telecom & Wireless

Regulatory agencies

• Authority for Info-communications Technology Industry (AITI)

Regulations

• All telecommunication, radio communication and satellite equipment to be sold and used in Brunei Darussalam must be type approved by AITI.
• Type approval must be registered under a local representative who holds a valid AITI Dealer licence.
• FCC/EN test reports are acceptable and there is no sample requirement.
• An import permit is required for products to enter customs, upon type approval of equipment.
• Products must be marked with the AITI Approved label.
• EMC compliance is required for the above, where applicable.

Guidelines

• A local representative is required.
• TYPE APPROVAL PROCEDURE
• Registration for license
• Application for type approval
• Submission of test report and essential documents
• Review of documents
• Issuance of type approval
• Issuance of import permit

Applicable product categories

• Level 1: Faxes, telephone systems, PABX/KTS, ADSL modems (Fixed), audio and video conferencing systems, short range devices, VOIP
• Level 2: Cordless telephone systems, amateur radios, satellite radios, marine radios, pagers, satellite receivers, Kristal Astro
• Level 3: Modems (wireless), mobile phones, base stations, radars, radio data transceivers, high power radio equipment, aeronautical radio transceivers, walkie talkie radios

To determine if a particular product is subject to the above regulations, please contact us.

Canada

Considering selling into Canada

Regulations and compliance requirements can pose challenges to companies who are looking to export their new products in Canada. These local compliance requirements and product regulations are put in place to provide assurance that the products and services are safe, of good quality and fit for consumers’ needs.

Most products seeking global market access into the Canadian market must meet specific requirements depending on the scope of the product. Testing and certification must also be conducted by a testing and certification body accredited by Standards Council of Canada where applicable.

Ensure that your products successfully meet Global Market Access Canadian standards by working with a market leader, iCertifi. iCertifi fully understands the local requirements and procedures applicable in Canada. You can rely on our expertise and knowledge to help you access Canadian markets efficiently while at the same time, be assured of our objectivity, integrity and professionalism.

Global market access information by category

Electrical Safety

Regulatory agency

• Standards Council of Canada (SCC)

Regulations

• Certification must be obtained from an SCC accredited CB.
• Safety testing is mandatory and factory inspections are required, where applicable.
• Compliance with CSA, UL and/or IEC standards.

Guidelines

• Although certification is not mandatory, it is highly recommended for marketing purposes and offers state-level authorities a sound basis for product evaluation.
• Certified products are marked by the manufacturer with the mark of the SCC accredited CB

Applicable product categories

• To determine if a particular product is subject to the above regulations, please contact us.

EMC

Regulatory agency

• Innovation, Science, and Economic Development Canada (ISED)

Regulations

• Manufacturers’ declaration is required for certain products according to ICES standards.

Guidelines

• A local representative is required.

DOC PROCEDURE

• Test the equipment to verify compliance at an accredited test laboratory.
• Keep a compliance folder on file.
• Affix the equipment with the ISED Company Number and ISED Registration Number as stated in the requirements.
• Register the equipment with the Bureau through E-filing and add the equipment to ISED’s Terminal Equipment List.

CERTIFICATION PROCEDURE

• Manufacturers must use an ISED recognized CB.
• Certified equipment should be labelled in accordance with ISED labelling requirements.

Applicable product categories

• A full list of applicable telecom equipment may be found here.
• A full list of applicable radio equipment may be found here.

1. To determine if a particular product is subject to the above regulations, please contact us.

European Union

Considering selling into European Union

The European Union consists of 28 member states located in Europe. For most products seeking global market access into the EU, there are harmonized regulations (EU Directives) which need to be complied with depending on its product scope. Most directives will require a CE Mark, a mandatory mark that demonstrates a manufacturers’ compliance to applicable EU directives. Individual country requirements may also apply.

 

Global market access information by category

Electrical Safety

Regulatory agency

• European Commission (EC)

Regulations

• CE marking*, according to EU Directives, is mandatory.
• DoC is sufficient but certification is recommended for marketing.
• Product safety testing is required.
• Compliance with European EN standards

^* CE marking is not a certification, approval or quality mark, but a manufacturer’s declaration that the product meets the essential requirements of the respective directives. Most EU Directives require CE marking.

EMC

Regulatory agency

• European Commission (EC)

Regulations

• CE marking according to EMC Directive.

Environmental

Regulatory agency

• European Commission (EC)

Regulations

ENERGY EFFICIENCY

• The Energy-related Products (ErP) Directive has repealed the Energy-using Products (EuP) Directive, extending the scope of eco-design requirements to all ErPs.
• The EC is still reviewing its effectiveness. For product categories with regulations in force, CE marking applies.

RoHS & WEEE

• RoHS is a CE marking directive. Even though WEEE is not a CE marking directive, products must comply with the RoHS and WEEE Directives where applicable.
• Manufacturers must register compliance in target countries.

Telecom & Wireless

Regulatory agency

• European Commission (EC)

Regulations

• CE marking according to telecom and wireless directives.
• DoC is sufficient but certification is recommended for marketing. Where there is lack of harmonized standards, it is necessary for manufacturers to engage a Notified Body^*.

^* Notified bodies are organizations that have been accredited by EU Member States to serve as independent test laboratories to access whether products meet the requirements of product directives. They must have the necessary qualifications to meet the testing requirements set forth in the directives.

More information on EU regulations

• Identify the directives that apply to the product. If more than one applies, all must be complied with.
• Determine the extent to which the product complies with the requirements of the applicable directive(s).
• Choose the conformity assessment procedure* based on the directive for your product.
• Select the applicable product standards and test methods for your product and select an independent laboratory if the directive(s) states that product testing is to be done externally.
• Compile the Technical File of technical documentation for your product. The Technical File holds information that verifies that the testing was conducted properly and that the product complies with applicable standards; it is product dependent.
• Prepare a DoC declaring that the product fulfils the requirements of the applicable directive(s) with the legally binding signature of the manufacturer.
• Affix the CE mark to your product. There are specific rules to adhere to in CE marking.

* Conformity Assessment Procedure options for products with minimal risk include DoC while products with greater risks may require tests, audits or additional certificates from a Notified Body.

Product categories requiring CE marking include the products listed below.

• Cableway equipment
• Electrical products
• Gas appliances
• Medical devices
• Telecommunications equipment
• Toys

A full list of product categories may be found here.

Product groups with regulations according to the ErP Directive include:

• Consumer electronics (televisions)
• Electric motors
• External power supplies
• Household refrigerating appliances
• Non-directional household lamps
• Simple set-top boxes
• Standby and off-mode losses
• Tertiary sector lighting

To determine if a particular product is subject to the above regulations, please contact us.

iCertifi has the experience and capability to support manufacturers in attaining compliance with EU*(and individual country) requirements and obtaining the necessary approvals. The iCertifi family has the expertise and capability to facilitate testing of your product to a large variety of Directives.

iCertifi can provide:

• Expert opinions in the compliance of CE marking requirements
• Test reports to support Technical File documentation
• CE marking
• Certification of Conformity^** for safety, EMC, energy efficiency, RoHS & WEEE and applicable standards
• Authorised Representative Service

* EU Directives are the minimum requirements that manufacturers must meet for products to enter the EU. However, individual country requirements may also be applicable.

India

Considering selling into India

Regulations and compliance requirements can pose challenges to companies who are exploring new markets overseas. Most products seeking global market access into the Indian market must meet the relevant requirements of the authorities depending on the product scope. These product safety requirements and regulations are put in place to reduce risks, improve quality of life and ensure safety during use.

You can ensure that your products successfully meet the Global Market Access Indian standards by working with a market leader,iCertifi.iCertifi fully understands the local requirements and procedures applicable in India. You can rely on our expertise and knowledge to help you access key markets efficiently while at the same time, be assured of our objectivity, integrity and professionalism.

Global market access information by category

Electrical Safety – Compulsory Registration Scheme (CRS)

Regulatory agency

• Department of Electronics and Information Technology (DietY)

Regulations

• The Compulsory Registration Scheme (CRS) covers 30 types of electronics and information technology goods.
• Registered users should use the Standard Mark along with Registration number and IS No.

Guidelines

• A local representative is required.

CRS PROCEDURE

• Testing in BIS recognized laboratory.
• Submit application to BIS.
• Grant of registration.

Applicable product categories

• To determine if a particular product is subject to the above regulations, please contact us.

Our services at a glance

• iCertifi has the experience and capability to support manufacturers in attaining compliance with Indian requirements and obtaining the necessary approval.iCertifi is also able to support manufacturers in attaining the voluntary S Mark under the Safety Certification Scheme operated by STQC.

Electrical Safety – ISI Certification

Regulatory agency

• Bureau of Indian Standards (BIS)

Regulations

• The ISI Mark or Standard Mark, is issued by BIS under its certification scheme.
• ISI certification* is a self-regulation scheme.
• The scheme itself is voluntary; however, the Government has enforced mandatory certification on various products.
• While BIS grants licenses on application, the enforcement of compulsory certification is done by the notified authorities – in this case, officers appointed by State Government/Central Government.
• Compliance with ISO Guide 28 and 65.

* Type Approval Certificate procedure and submission requirements in India differ between foreign manufacturers and Indian importers.

Guidelines

• A local representative is required.

ISI CERTIFICATION PROCEDURE

• Submit application with essential documents to BIS.
• Factory inspection by BIS officer.
• Sample picking in factory for independent testing.
• Grant of license.
• The simplified procedure for ISI certification** requires a submission application with test reports issued by BIS approved test laboratories.

** The simplified procedure is not granted to some items under mandatory certification and all first-time licenses for any product.

Applicable product categories

Product categories requiring BIS registration include:

• Cables
• Circuit breakers
• Electric immersion water heaters
• Electric irons
• Electric lamps
• Electric radiators
• Electric stoves
• Switches, etc.

A full list of product categories may be found here. To determine if a particular product is subject to the above regulations, please contact us.

Our services at a glance

• iCertifi has the experience and capability to support manufacturers in attaining compliance with Indian requirements and obtaining the necessary approval. iCertifi is also able to support manufacturers in attaining the voluntary S Mark under the Safety Certification Scheme operated by STQC.

Environmental

Regulatory agency

• Bureau of Energy Efficiency (BEE), Ministry of Power

Regulations

ENERGY EFFICIENCY

• The mandatory energy efficiency Star Label is required for certain products under the Standards & Labelling Program.
• Requirements for each product are specified in its schedule.

RoHS

• The Indian government has published E-Waste (Management) Rules, 2016, and it shall come into force from the 1 October, 2016.

Guidelines

• Manufacturers are required to register themselves for the Standards & Labelling Program and file an e-application for the Star Label.
• Equipment required to be labelled are listed on the BEE website.

Applicable product categories

• Product categories under the mandatory energy efficiency scheme include distribution transformers, room air conditioners, frost-free refrigerators and tubular florescent lamps.

Telecom

Regulatory agency

• Telecommunication Engineering Centre (TEC), Department of Telecommunications

Regulations

• Type approval is required to indicate compliance with Generic Requirements (GR).
• Interface approval is required to indicate compliance with Interface Requirements (IR).
• Certification of approval is issued against applicants’ own specifications when IR/GR is not available, and in particular cases*.
• EMC compliance is required for the above, where applicable.

* TEC issues certification of approval in particular cases, specifically for GSM phones, 3G modems, Bluetooth-enabled wireless terminals against approved Standards of Standard Body.

Guidelines

• A local representative is required.
• Manufacturers need to submit an application with essential documents and test reports to the respective agencies.
• Testing for certain products must be performed by in- country test laboratories.

Applicable product categories

• To determine if a particular product is subject to the above regulations, please contact us.

Our services at a glance

• iCertifi has the experience and capability to support manufacturers in attaining compliance with Indian requirements and obtaining the necessary approvals.

Wireless

Regulatory agency

• Wireless Planning and Coordination Wing (WPC), Ministry of Communications and IT, Department of Telecommunications

Regulations

• Type approval is required for the import of wireless equipment for use in the existing allocated frequency bands.
• New Frequency Allocation is required for use of wireless equipment in a new frequency band that needs to be allocated.
• Online filing of all types of license applications is mandatory, followed by hard copy submission of the license application.

Guidelines

• A local representative is required.
• Manufacturers need to submit an application with essential documents and test reports to the respective agencies.
• Testing for certain products must be performed by in-country test laboratories.

Applicable product categories

• To determine if a particular product is subject to the above regulations, please contact us.

Our services at a glance

• iCertifi has the experience and capability to support manufacturers in attaining compliance with Indian requirements and obtaining the necessary approvals.

To determine if a particular product is subject to the above regulations, please contact us.

Israel

Considering selling into Israel

Most products entering the Israeli market must meet the relevant requirements of the authorities depending on the product scope. Product safety requirements and regulations are put in place to reduce risks, improve quality of life and ensure safety during use.

Regulations and compliance requirements can however pose challenges to companies who are looking to explore new markets. You can ensure that your products successfully meet the Israeli standards by working with a market leader ,iCertifi.

iCertifi fully understands the local requirements and procedures applicable in Israel. You can rely on our expertise and knowledge to help you access key markets efficiently while at the same time, be assured of our objectivity, integrity and professionalism.

Market access information by category

Electrical Safety

Regulatory agency

• Standards Institution of Israel (SII)

Regulations

• Electrical product safety testing is mandatory, and manufacturers are required to obtain Type Approval to import products into Israel.
• Manufacturers may also choose to apply for the SII Mark in order to apply the SII Safety Mark on products.
• Product must be marked with SII Standard Mark if manufacturers apply for SII mark for the products.
• Compliance with SI standards.
• EMC compliance is required for electrical products, telecom and wireless equipment, where applicable.

Guidelines

• Approval is granted based on review of CB test reports.
• For SII test certification, no factory inspection is required and no mark will be granted.
• For the SII Mark, pre-license factory inspection is required and the SII Safety Mark will be granted.

Applicable product categories

• To determine if a particular product is subject to the above regulations, please contact us.

Our services at a glance

• iCertifi can assist with obtaining test reports accepted by SII for the issuance of Type Certification, for ease with Israel MOC Telecom Type Approval.

Energy Efficiency

Regulatory agency

• Ministry of National Infrastructures

Regulations

• Minimum Energy Performance Standards (MEPS) are required for certain products.
• Mandatory energy efficiency labelling is also required for certain products.

Guidelines

• The labelling requirement is based on minimum power consumption

Applicable product categories

Product categories that require mandatory energy efficiency labelling include:

• Air conditioners
• Cooktops and ranges/ovens
• Dishwashers
• Domestic and office electric appliances
• Dryers
• Lamps
• Refrigerators
• Television sets
• Washing machines

To determine if a particular product is subject to the above regulations, please contact us.

Our services at a glance

• iCertifi can support manufacturers in obtaining voluntary endorsement labels.

 

Telecom

Regulatory agency

• Ministry of Communications (MoC) Israel

Regulations

• Equipment connected to the public network requires type approval from MoC.

Guidelines

• A local representative is required.
• Approval can often be issued based on review of foreign standard test reports without in-country testing.

Applicable product categories

• To determine if a particular product is subject to the above regulations, please contact us.

Our services at a glance

• As a CB Scheme member, iCertifi is able to perform testing to international standards acceptable for MoC approval.

Wireless

Regulatory agency

• Ministry of Communications (MoC) Israel

Regulations

• Radio terminal devices require approval from MoC.

Guidelines

• A local representative is required.
• The approval process includes review of foreign standard test reports, but MoC may require additional testing and/or inspection sample(s) of the equipment.

Applicable product categories

• To determine if a particular product is subject to the above regulations, please contact us.

 

Energy Efficiency

Regulatory agency

• Directorate General of Electricity and Energy Utilization

Regulations

• The Indonesian government is developing residential appliance efficiency standards and labelling programs.
• Voluntary labels have been established for refrigerators and labelling programs are currently under consideration for other products.

Guidelines

• Although there are currently no existing standards for any products, voluntary environmental standards are being considered for several products.

Applicable product categories

• To determine if a particular product is subject to the above regulations, please contact us.

Our services at a glance

• iCertifi has the experience and capability to support manufacturers in attaining compliance with Indonesian requirements and obtaining the necessary approval. iCertifi can also support manufacturers in obtaining voluntary endorsement labels.

Telecom & Wireless

Regulatory agency

• Directorate General of Posts and Informatics Resources (SDPPI)

Regulations

• Certification by type approval of regulated products is required.
• Product testing should be performed by an in-country test laboratory.
• Certification is issued by SDPPI.
• Products must be marked with SDPPI label.

Guidelines

• Type A: Approval issued to manufacturer
• Type B: Approval issued to importer (Required to import goods)

CERTIFICATION PROCEDURE

• Submission of application.
• Product testing.
• Submission of test report and essential documents.
• Approval of certification.
• Product labelling as appropriate.

Applicable product categories

• To determine if a particular product is subject to the above regulations, please contact us.

Our services at a glance

• iCertifi has the experience and capability to support manufacturers in attaining compliance with Indonesian requirements and obtaining the necessary approval.

Kazakhstan

Considering selling into Kazakhstan

Regulations and compliance requirements can pose challenges to companies who are looking to export their new products to Kazakhstan. Most products entering the Kazakhstan’s markets must meet the requirements of the Kazakhstan’s certification system. The local laws and product regulations are generally put in place to provide assurance that the products and services are safe, of good quality and fit for consumers’ needs.

Ensure that your products successfully meet Kazakhstan standards by working with a market leader,iCertifi.iCertifi fully understands the local requirements and procedures applicable in Kazakhstan. You can rely on our expertise and knowledge to help you access Kazakhstan’s markets efficiently while at the same time, be assured of our objectivity, integrity and professionalism.

Market access information by category

Electrical Safety

Regulatory agency

• Customs Union Technical Regulation (CU TR)

Regulations

• On 1 July 2010, the Customs Union (CU) between the Russian Federation, Belarus and Kazakhstan came into force.
• EA Customs Union (EAC) Approval is a singular harmonised Approval Certificate for EMC and/or Safety for certain products. It covers all member states in the union.
• The product must be marked with the EAC Mark.
• There are 2 methods of conformity assessment for electrical products: Certification (CoC) and declaration (DoC). The validity is up to 5 years.

Guidelines

• A local representative is required for DoC.
• Conformity Assessment includes:
  • Submission of application, test reports and essential documentation.
  • Factory inspection report.
  • Quality Management System certification (where applicable).
  • The EAC mark should be shown on the product label.

Applicable product categories

• Products with nominal voltage of 50 to 1000 AC and 75 to 1500 DC require CU approval. To determine if a particular product is subject to the above regulations, please contact us.

Energy Efficiency

Regulatory agency

• Ministry of Industry and New Technologies of the Republic of Kazakhstan

Regulations

• There are currently no environmental requirements in Kazakhstan. For further enquiries, please contact us.

Telecom & Wireless

Regulatory agency

• “TELSET” Certification Body for Telecommunication

Regulations

• According to the Law of the Republic of Kazakhstan “About communication” the communication facilities realisation in Kazakhstan is possible at presence of Conformity Certificates of the Republic of Kazakhstan only.

Applicable product categories

• To determine if a particular product is subject to the above regulations, please contact us.

Malaysia

Considering selling into Malaysia

Product safety requirements and regulations are put in place to reduce risks of injury, ensure safety during use and improve quality of life. Most products entering the Malaysian market must meet the relevant requirements of the authorities depending on the product scope.

Regulations and compliance requirements can however pose challenges to companies who are looking to explore new markets in Malaysia. You can ensure that your products successfully meet the Malaysian standards by working with a market leader, iCertifi.

iCertifi fully understands the local requirements and procedures applicable in Malaysia. You can rely on our expertise and knowledge to help you access key markets efficiently while at the same time, be assured of our objectivity, integrity and professionalism.

Market access information by category

Electrical Safety

Regulatory agency

• The Energy Commission, Suruhanjaya Tenaga (ST)

Regulations

• The Electrical Supply Act 1990 and Electrical Regulation 1994 require manufacturers to apply for Certificate of Approval (COA) and affix the product with the SIRIM Label or certification mark.
• Standards accepted by ST:
  • Test report with or equivalent to Malaysia Standards (MS) issued by a DSM recognized laboratory.
  • CB test report and certificate.
  • Reports by laboratories that are accredited by DSM, ILAC, APLAC, etc.

Guidelines

• Application must be made by the local importer.
• Manufacturers should obtain COA from ST before applying for SIRIM Label or certification mark.
• The SIRIM Label can be obtained through the SIRIM Product Certification Scheme (PCS) or Batch Testing Scheme (BTS).

Applicable product categories

Product categories requiring SIRIM Label include:

• Circuit breakers
• Domestic power tools
• Household appliances
• Lighting
• Plug tops/Plugs
• Socket outlets
• Switches and dimmers
• Wires/Cables/Cords Etc.

A full list of product categories may be found here. To determine if a particular product is subject to the above regulations, please contact us.

 

Energy Efficiency

Regulatory agency

• The Energy Commission, Suruhanjaya Tenaga (ST)

Regulations

• Fiscal incentives have been introduced by the government for efficient electrical equipment and insulation material.
• Minimum Energy Performance Standards (MEPS) are required for certain products.
• The Energy Labelling Program is applicable and voluntary to certain products.

Guidelines

• Applications should be made to ST.
• Performance testing, where applicable, should be done by SIRIM QAS International or any laboratory recognized by Standard Malaysia.
• All manufacturers and importers of the following products must affix the energy efficiency label onto the products before they can be sold to customers namely for Air conditioners, Domestic fans, Refrigerators and Television sets.

Applicable product categories

• A full list of product categories may be found here. To determine if a particular product is subject to the above regulations, please contact us.

Our services at a glance

• iCertifi has the experience and capability to support manufacturers in attaining compliance with Malaysia requirements and obtaining the necessary approval. iCertifi can also support manufacturers in obtaining voluntary endorsement labels.

Medical Devices

Regulatory agency

• Medical Devices Bureau (MDB), Ministry of Health

Regulations

• All medical devices to be placed in Malaysian market are required to be registered under Act 737.
• It is a mandatory requirement stated by law for establishments to obtain establishment licences to conduct activities related to medical devices.
• The definition of medical device is in accordance with the global harmonised (GHTF).
• Medical devices are grouped into four classes with Class A posing the lowest risk, Class B with low to moderate risk, Class C with moderate to high risk and Class D with the highest risk.

Guidelines

• A Local Authorised Representative (LAR) is required.

REGISTRATION PROCEDURE

• Classify and group the medical device.
• Submit application form through the “MeDC@St” system*.
• Appoint a CAB to conduct conformity assessment.
• Apply for registration.
• Labelling of medical device.

* MeDC@St is a web-based Online Application System for Establishment Licensing, Medical Device Registration

Applicable product categories

• The scope of this Guideline covers all medical devices to be registered under Act 737. To determine if a particular product is subject to the above regulations, please contact us.

Our services at a glance

• iCertifi has the experience and capability to support manufacturers in attaining compliance with Malaysian requirements and obtaining the necessary approval.

Telecom & Wireless

Regulatory agency

• Malaysian Communications and Multimedia Commission (MCMC)

Regulations

• Type approval is required for fixed line and wireless telecommunications products.
• SIRIM QAS International is the designated CB.
• Products must be marked with Self-labeling.
• EMC compliance is required for the above, where applicable.

Guidelines

• Application must be made by the local importer.
• Two samples are required for physical inspection. Upon approval, products should be labelled with the SIRIM Label accordingly.

Applicable product categories

Regulated telecom equipment include:

• Analogue Calling Line Identity Presentation (ACLIP) facility for connection to PSTN
• Asymmetric Digital Subscriber Line (ADSL) transceivers
• Connecting to the Integrated Services Digital Network (ISDN) using basic access
• Connecting to the ISDN using primary rate access
• Cordless telephone systems
• Low frequency cables and wires with PVC insulation and PVC sheath
• Overvoltage protective devices
• Private Automatic Branch Exchange (PABX) system for connection to PSTN
• Terminal equipment for Connecting to Public Switch Telephone Network (PSTN)

Regulated wireless equipment include:

• Amateur radio equipment
• GSM mobile terminals
• Land mobile radio equipment
• Broadband Wireless Access (BWA) Equipment
• IMT-2000 Third-Generation (3G) cellular mobile terminals
• Short Range Devices (SRD)

To determine if a particular product is subject to the above regulations, please contact us.

Our services at a glance

• iCertifi has the experience and capability to support manufacturers in attaining compliance with Malaysian requirements and obtaining the necessary approval.

Mexico

Considering selling into Mexico

Regulations and compliance requirements can pose challenges to companies who are looking to export their products to Mexico. Most products entering the Mexico markets must meet the Norma Oficial Mexicana (NOM) mark requirements. The local laws and product regulations are generally put in place to provide assurance that the products and services are safe, of good quality and fit for consumers’ needs.

Ensure that your products successfully meet Mexican standards by working with a market leader,iCertifi.iCertifi fully understands the local requirements and procedures applicable in Mexico. You can rely on our expertise and knowledge to help you access Mexican markets efficiently while at the same time, be assured of our objectivity, integrity and professionalism.

Global market access information by category

Electrical Safety

Regulatory agency

• Secretariat of Commerce and Industrial Promotion (SECOFI)

Regulations

• Manufacturers are required to obtain NOM Certification for regulated products.
• All electrical products, domestic or imported, must meet NOM requirements.
• Testing for Type Approval Certification in Mexico must be performed by an accredited Mexican testing agency or a laboratory outside of Mexico that has a MRA with an accredited Mexican laboratory.
• The CBs in Mexico that administer NOM certification are NYCE and ANCE.
• Compliance with NOM standards.

Guidelines

• A local representative is required.
• Essential documentation has to be submitted to the CB for certification.
• Post-market surveillance after obtaining certification is required.

Applicable product categories

• The NOM certificate applies to over 2000 product categories from electronics to household appliances.
• To determine if a particular product is subject to the above regulations, please contact us.

Our services at a glance

• iCertifi has the experience and capability to support manufacturers in attaining compliance according to the Mexican NOM requirements and obtaining the necessary approval.

Energy Efficiency

Regulatory agency

• The National Commission for the Efficient use of Energy (CONUEE)

Regulations

ENERGY EFFICIENCY

• Minimum Energy Performance Standard (MEPS) are required for some products.
• Mandatory energy efficiency labelling is required for certain products.

MAXIMUM LIMITS OF ELECTRICAL POWER

• After September 20, 2014, all devices covered by the NOM- 032-ENER-2013 will start to be certified in accordance with the NOM.

Guidelines

• Products are rated based on the percentage of energy savings relative to the MEPS level, or maximum limits of electrical power according to NOM standards.

Applicable product categories

Product categories that require mandatory labelling include:

• Air conditioners
• Clothes washers
• Freezers
• Refrigerators
• Water heaters, etc.

Product categories that require mandatory maximum limits of electrical power:

• Audio playback equipment
• DVD
• Image reproduction equipment, including printers, scanners, fax machines, copiers and multifunctionals
• Microwave ovens Digital TV adapters
• Television set-top boxes
• Televisions

To determine if a particular product is subject to the above regulations, please contact us.

Our services at a glance

• iCertifi has the experience and capability to support manufacturers in attaining compliance according to the Mexican NOM requirements and obtaining the necessary approval. iCertifi can also support manufacturers in obtaining voluntary endorsement labels.

Telecom & Wireless

Regulatory agency

• Federal Institute of Telecommunication (IFETEL)

Regulations

• All products that use a frequency to transmit and/or receive signals and all telecom products that connect to the PSTN or public network must be certified by IFETEL.
• All products approved under the IFETEL Scheme should be labelled as follows:
  • For products with on-board/integrated radios: “IFETEL: xxxxxxxxxxxxx”
  • For host products containing approved modules: “This product contains an Approved module, Model No. xxxx, IFETEL No. xxxxxxxxxxxxx

Guidelines

• A local representative is required.
• In-country testing is performed in EMA accredited laboratories.
• Two samples of the following are required: Cables, power source, movable antenna, amplifier, testing software including procedures, technical specifications, installation and operation manuals.
• Certification of a family of models is not allowed. Testing, certification and IFETEL registration is required for each product and model.

Applicable product categories

All telecommunication equipment including wireless products. To determine if a particular product is subject to the above regulations, please contact us.

Our services at a glance

• iCertifi has the experience and capability to support manufacturers in attaining compliance according to the Mexican NOM requirements and obtaining the necessary approval.

Philippines

Considering selling into Philippines

Most products entering the Philippines market must meet the relevant requirements of the authorities depending on the product scope. Product safety requirements and regulations are put in place to reduce risks, improve quality of life and ensure fit for use.

These regulations and compliance requirements can however pose challenges to companies who are looking to explore new markets. You can ensure that your products successfully meet the Philippines standards by working with a market leader, iCertifi.

iCertifi fully understands the local requirements and procedures applicable in the Philippines. You can rely on our expertise and knowledge to help you access key markets efficiently while at the same time, be assured of our objectivity, integrity and professionalism.

Market access information by category

Electrical Safety

Regulatory Agency

• Bureau of Product Standards (BPS), Department of Trade and Industry (DTI)

Regulations

• Manufacturers need to comply with mandatory requirements by obtaining the Philippine Standard (PS) Quality Certification Mark License or the Import Commodity Clearance (ICC) Certification Mark, from BPS (for imported products).
• Importers with PS certification only need a Certificate of exemption for ICC Mark.
• Factory inspection and product testing to applicable standards are required.
• Compliance with Philippine National Standards (PNS).

Guidelines

• A local representative is required.

PS CERTIFICATION PROCEDURE

• Application.
• Factory and product audit.
• Third-party independent testing.
• Test report evaluation.
• License to use PS mark.
• Surveillance.

ICC CERTIFICATION PROCEDURE

• Application.
• Inspection and testing by a BPS accredited test laboratory (not required if the applicant has a foreign test report).
• Evaluation.
• Issuance of ICC.

Applicable product categories

• To determine if a particular product is subject to the above regulations, please contact us

Energy Efficiency

Regulatory agency

• Bureau of Product Standards (BPS), Department of Trade and Industry (DTI)

Regulations

• Minimum Energy Performance Standards (MEPS) are required for certain products.
• Certain products require mandatory labelling under the Energy Efficiency Standards and Labelling Program.

Guidelines

• Applications should be made to BPS for the ENERGY GUIDE label.
• Products should comply with Philippine National Standards (PNS).

Applicable product categories

Product categories that require mandatory energy efficiency labelling include:

• Ballasts
• Compact fluorescent lamps
• Freezers
• Refrigerators
• Room air conditioners

To determine if a particular product is subject to the above regulations, please contact us.

Our services at a glance

• iCertifi has the experience and capability to support manufacturers in attaining compliance according to the Philippines requirements and obtaining the necessary approvals. iCertifi can also support manufacturers in obtaining voluntary endorsement labels.

Telecom & Wireless

Regulatory agency

• National Telecommunications Commission (NTC)

Regulations

• Terminal Equipment, or Customer Premises Equipment (CPE) and Radio Communications Equipment (RCE) require certification by NTC.
• CPEs require type approval while RCEs require type acceptance.
• Testing of all CPEs should be performed by the Philippines Long Distance Telecommunications (PLDT) Company.
• For RCEs, test reports based on EN and FCC standards are accepted.
• Products must be marked with the NTC Mark.
• EMC compliance is required for the above, where applicable.

Guidelines

• A local representative is required.
• Suppliers of CPE must be accredited by the NTC while RCE dealers require a permit.

CERTIFICATION PROCEDURE

• Application and submission of essential documents.
• In-country product testing (not required for RCEs).
• Evaluation.
• Type approval/acceptance.

Applicable product categories

• To determine if a particular product is subject to the above regulations, please contact us

Our services at a glance

• iCertifi has the experience and capability to support manufacturers in attaining compliance according to the Philippines requirements and obtaining the necessary approvals. iCertifi can also coordinate testing to EN and FCC standards for RCEs.

Saudi Arabia

Considering selling into Saudi Arabia

Most products seeking global market access into the Saudi Arabian market must meet the relevant requirements of the authorities depending on the product scope. Product safety requirements and regulations are put in place to reduce risks, improve quality of life and ensure safety during use.

Regulations and compliance requirements can pose challenges to companies who are looking to explore new markets. You can ensure that your products successfully meet the Global Market Access Saudi Arabian standards by working with a market leader, iCertifi.

iCertifi fully understands the local requirements and procedures applicable in Saudi Arabia. You can rely on our expertise and knowledge to help you access key markets efficiently while at the same time, be assured of our objectivity, integrity and professionalism.

Global market access information by category

Electrical Safety

Regulatory agency

• Saudi Standards, Metrology and Quality Organization (SASO)

Regulations

• Imported products are subject to the SASO Certification Program (ICCP).
• CoC, issued by an entity authorized by the competent official agency in the country of origin, is required for all imported regulated products.
• Every new shipment requires a Certificate of Registration (CoR) and CoC. Repeat applications (for the same product) with a valid CoR will expedite the issuance of CoC.
• Testing by an accredited test laboratory is required.
• All imported consignments must bear a non-removable indication of origin.
• Compliance with SASO and IEC standards.
• EMC compliance is required for the above, for products with telecommunication function.

Guidelines

• Pre-shipment Inspection (PSI) is required for CoC.
• The authorities in Saudi Arabia may also take random samples from imported consignments to verify compliance.
• In the event that a shipment arrives at any Saudi Arabia port without a CoC, the shipment will either be rejected or require product testing by an approved local test laboratory.

Applicable product categories

• Regulated products include all consumer products arriving in Saudi Arabia, except military equipment, medical products and food. To determine if a particular product is subject to the above regulations, please contact us.

Our services at a glance

• iCertifi has the experience and capability to support manufacturers in attaining compliance with Saudi Arabian requirements and obtaining the necessary approval.

Energy Efficiency

Regulatory agencies

• Saudi Standards, Metrology and Quality Organization (SASO)

Regulations

• The SASO EER Certificate is issued for registered products with Saudi Standards, Metrology and Quality Organization (SASO) for Energy Efficiency Labels, based on requirements according to applicable SASO standards.

Guidelines

• Each product model is required to be registered with SASO and labelled with an energy efficiency rating.
• The rating will be assigned based on the results of energy performance tests according to recently approved SASO standards.
• Appliances will be assigned a rating of one to six stars. The greater the number of stars, the higher the energy efficiency.

Applicable product categories

Product categories that require mandatory energy efficiency labelling include:

• Air conditioners
• Freezers
• Refrigerators
• Washing machines

To determine if a particular product is subject to the above regulations, please contact us.

Telecom & Wireless

Regulatory agency

• Communications and Information Technology Commission (CITC)

Regulations

• CITC Interim Authorization for imported telecommunications and wireless equipment is required.

Guidelines

• CITC’s Interim Authorization is based upon review of existing foreign standard test reports such as EN or FCC test reports.
• The Commission may obtain a sample of the equipment held by the Authority for testing to verify conformance to the Commission’s requirements

Applicable product categories

• Technical specifications for telecommunications and IT equipment can be found here. To determine if a particular product is subject to the above regulations, please contact us.

South Africa

Considering selling into South Africa

Most products entering the South African market must meet the relevant requirements of the authorities depending on the product scope. Product safety requirements and regulations are put in place to reduce risks, improve quality of life and ensure fit for use.

Regulations and compliance requirements can however pose challenges to companies who are looking to explore new markets. You can ensure that your products successfully meet the South African standards by working with a market leader, iCertifi.

iCertifi fully understands the local requirements and procedures applicable in South Africa. You can rely on our expertise and knowledge to help you access key markets efficiently while at the same time, be assured of our objectivity, integrity and professionalism.

Market access information by category

Electrical Safety

Regulatory agency

• National Regulator for Compulsory Specifications (NRCS)

Regulations

• A Letter of Authority (LoA) is required by manufacturers of regulated products upon conformity assessment.
• Test reports must be from a test laboratory by a national accreditation body affiliated to the International Laboratory Accreditation Cooperation (ILAC) and/or be an IECEE CB Scheme member.
• On top of LoA, manufacturers of regulated products may choose to obtain the South African Bureau of Standards (SABS) Mark.
• Compliance with SANS and/or IEC standards.

Guidelines

• A local representative is required.
• Manufacturers are first required to register with the NRCS Electrotechnical Department before a LOA will be issued.

LoA PROCEDURE

• Application.
• Submission of test report and essential documents.
• Review.
• Issuance of LoA.

Applicable product categories

• To determine if a particular product is subject to the above regulations, please contact us.

EMC

Regulatory agency

• South African Bureau of Standards (SABS)

Regulations

• EMC compliance is required for the above, where applicable.
• CoC for EMC is required for some equipment.

Guidelines

TYPE APPROVAL PROCEDURE

• Submission of application, test reports and essential documents.
• Review.
• Issuance of type approval.
• Labelling as appropriate.

Applicable product categories

• To determine if a particular product is subject to the above regulations, please contact us.

Our services at a glance

• iCertifi has the experience and capability to support manufacturers in attaining compliance with South African requirements and obtaining the necessary approval.

Energy Efficiency

Regulatory agency

• National Regulator for Compulsory Specifications (NRCS)

Regulations

• VC 9008 was published by the South African government on 7 February 2014. This compulsory specification covers energy efficiency requirements and energy efficiency labelling of some electrical and electronic apparatus.

Guidelines

• Test reports in IEC/EN format or any equivalent format acceptable to the NRCS and issued by an appropriately accredited and internationally recognized body which is a member of an IAF/ILAC/IECEE mutual recognition scheme in accordance with the NRCS’s conformity assessment policy.

Applicable product categories

Product categories that require mandatory energy efficiency labelling include:

• Air conditioners
• Audio and video equipment
• Dishwashers
• Electric ovens
• Refrigerators and freezers
• Tumble dryers
• Washer-dryer combinations
• Washing machines

To determine if a particular product is subject to the above regulations, please contact us.

Our services at a glance

• iCertifi has the experience and capability to support manufacturers in attaining compliance with South African requirements and obtaining the necessary approval. iCertifi can also support manufacturers in obtaining voluntary endorsement labels.

Telecom & Wireless

Regulatory agency

• Independent Communications Authority of South Africa (ICASA)

Regulations

• Type approval is required for regulated equipment.
• ICASA accept test reports against the relevant EN standards, provided that the testing has been performed at an accredited test facility.
• Products must be marked with ICASA label.

Guidelines

TYPE APPROVAL PROCEDURE

• Submission of application, test reports and essential documents.
• Review.
• Issuance of type approval.
• Labelling as appropriate.

Applicable product categories

• To determine if a particular product is subject to the above regulations, please contact us.

Taiwan

Considering selling into Taiwan

Most products entering the Taiwanese market must meet the relevant requirements of the authorities depending on the product scope. Product safety requirements and regulations are put in place to reduce risks, improve quality of life and ensure safety during use.

These regulations and compliance requirements can however pose challenges to companies who are looking to explore new markets in Taiwan. You can ensure that your products successfully meet the Taiwanese standards by working with a market leader, iCertifi.

iCertifi fully understands the local requirements and procedures applicable in Taiwan. You can rely on our expertise and knowledge to help you access key markets efficiently while at the same time, be assured of our objectivity, integrity and professionalism.

Market access information by category

Electrical Safety

Regulatory agency

• Bureau of Standards, Metrology and Inspection (BSMI), Ministry of Economic Affairs (MOEA)

Regulations

• The BSMI Safety Mark is mandatory for electrical and electronic products under the Commodity Inspection Act.
• There are 4 inspection schemes which require compliance with product inspection requirements:
  • Type approval batch inspection (TABI)
  • Monitoring inspection (MI)
  • Registration of product certification (RPC)*
  • DoC
• The choice of the appropriate conformity assessment procedure depends on the product characteristics as well as other factors.
• Compliance with Chinese National Standards (CNS).
• Testing should be done by BSMI or designated test laboratories.
• EMC compliance is required for the above, where applicable.

* The RPC scheme is broken down into 7 modules of assessment and requires manufacturers to comply with any one or a combination of these modules. 3C secondary lithium cells/batteries and power banks are mandatory to be included under the RPC scheme from 1 May 2014.

Guidelines

• Applicants must be a registered company in Taiwan.

GENERAL GUIDE

• TABI – Application with documentation and test reports are submitted to BSMI.
• MI – A simplified batch-by-batch inspection system.
• RPC – Application with documentation and test reports are submitted to a designated Certification Body (CB).
• DoC – Application with DoC are submitted to BSMI; applicant maintains technical file.

Applicable product categories

• Audio/video products
• Home appliances
• Information Technology Equipment
• Power tools, etc.

To determine if a particular product is subject to the above regulations, please contact us.

Our services at a glance

• iCertifi work closely with designated CB’s able to perform testing and issue Certification of Conformity (CoC) for a wide scope, supporting manufacturers in the applicable BSMI conformity assessment procedures.

Energy Efficiency

Regulatory agency

• Bureau of Energy (BOE), Ministry of Economic Affairs (MOEA)

Regulations

• Minimum Energy Performance Standards (MEPS) and Energy Efficiency Rating Labelling are required for many products.
• Voluntary government-backed labelling through Energy Conservation Label.

Guidelines

• After passing testing for compliance with certain standards, applicants may attach Energy Labels to products.

Applicable product categories

• To determine if a particular product is subject to the above regulations, please contact us.

Our services at a glance

• iCertifi has the experience and capability to support manufacturers in attaining compliance with Taiwanese requirements and obtaining the necessary approval. iCertifi can also support manufacturers in obtaining voluntary endorsement labels.

Telecom & Wireless

Regulatory agency

• National Communications Commission (NCC)

Regulations

• A type approval scheme is to be followed.
• The NCC Certification Mark should be affixed on the product after approval is granted.
• Testing must be conducted by a NCC-approved test laboratory.
• Type approval certificate is issued by a NCC-approved CB.
• EMC compliance is required for the above, where applicable.

Guidelines

• A local representative is required.
• Most NCC-approved test laboratories are in-country, thus, test reports generated by foreign test laboratories will not be accepted unless there are recognition agreements in place.

Applicable product categories

• To determine if a particular product is subject to the above regulations, please contact us.

United Arab Emirates (UAE)

Considering selling into United Arab Emirates (UAE)

Most products entering the United Arab Emirates (UAE) market must meet the relevant requirements of the authorities depending on the product scope. Product safety requirements and regulations are put in place to reduce risks, improve quality of life and ensure fit for use.

Regulations and compliance requirements can however pose challenges to companies exploring new markets. You can ensure that your products successfully meet the UAE standards by working with a market leader,iCertifi.

iCertifi fully understands the local requirements and procedures applicable in the UAE. You can rely on our expertise and knowledge to help you access key markets efficiently while at the same time, be assured of our objectivity, integrity and professionalism.

Market access information by category

Electrical Safety

Regulatory agency

• Emirates Authority for Standardisation and Metrology (ESMA)

Regulations

• Under the Emirates Conformity Assessment Scheme (ECAS), registration of regulated products is required.
• ESMA will issue an ECAS Registration Certificate for the product when conformity to the relevant standards is demonstrated.
• Manufacturers may also request for the Emirates Quality Mark

Guidelines

• Assessment, testing and evaluation of products should be conducted by ESMA or its recognized CABs.
• Product sampling is required and must be conducted by ESMA authorised personnel.

Applicable product categories

• Electric irons
• Electric power extension cords and adaptors
• Electric storage water heaters
• Microwave ovens

To determine if a particular product is subject to the above regulations, please contact us.

Our services at a glance

• iCertifi has the experience and capability to support manufacturers in attaining compliance with UAE requirements and obtaining the necessary approval.

Energy Efficiency

Regulatory agency

• Emirates Authority for Standardisation and Metrology (ESMA)

Regulations

• The UAE Energy Efficiency Standards & Labeling Program (EESL) is supervised and managed by the ESMA (Emirates Authority for Standardisation & Metrology), which is the authorised government agency responsible for the development of standards.

Guidelines

• Local representative required

CERTIFICATION PROCEDURE

• Submit application and testing report. The performance test report should be from an ISO 17025 certified laboratory.
• Evaluation of Annual Energy Consumption (EER).
• Equivalent star rating is assigned if the product meets the minimum requirements.

Applicable product categories

• Non-ducted room air conditioners
• Refrigerating appliances
• Washing machines and dryers
• Lighting

To determine if a particular product is subject to the above regulations, please contact us.

Our services at a glance

• iCertifi has the experience and capability to support manufacturers in attaining compliance with UAE requirements and obtaining the necessary approval. iCertifi can also support manufacturers in obtaining voluntary endorsement labels.

Telecom & Wireless

Regulatory agency

• Telecommunications Regulatory Authority (TRA)

Regulations

• TRA requires the approval of radio equipment and telecommunications terminal equipment to comply with relevant technical specifications.
• Labeling is required for telecommunication equipment.

Guidelines

• A local representative is required.
• Equipment is required to be registered with the TRA before it can be supplied in the UAE.

Applicable product categories

• In general, all telecommunications terminal equipment connected to a public network and all radio equipment shall be registered with the TRA before it can be supplied in the UAE. To determine if a particular product is subject to the above regulations, please contact us.

Vietnam

Considering selling into Vietnam

Most products seeking global market access into the Vietnam market must meet the relevant requirements of the authorities depending on the product scope. Product safety requirements and regulations are put in place to reduce risks, improve quality of life and ensure safety during use.

Regulations and compliance requirements can however pose challenges to companies who are looking to explore new markets. You can ensure that your products successfully meet the Global Market Access Vietnamese standards by working with a market leader, iCertifi.

iCertifi fully understands the local requirements and procedures applicable in Vietnam. You can rely on our expertise and knowledge to help you access key markets efficiently while at the same time, be assured of our objectivity, integrity and professionalism.

Global market access information by category

Electrical Safety

Regulatory agency

• Directorate for Standards, Metrology and Quality (STAMEQ)

Regulations

• Regulated products that are locally manufactured require mandatory certification and the Vietnam Certification Centre (QUACERT) quality mark.
• Imported products are regulated by import-export goods control and only require a DoC or certification by a third-party Certification Body (CB).
• Compliance with TCVN and/or IEC standards.
• EMC compliance is required for certain products.

Guidelines

CERTIFICATION PROCEDURE

• Testing by designated test laboratory.
• Submission of application and essential documents.
• STAMEQ assessment.
• Obtain Certification.
• Surveillance.

Applicable product categories

• To determine if a particular product is subject to the above regulations, please contact us.
• Safety mark is required for below equipment categories:
  • Instant water heater
  • Storage water heater
  • Appliances for skin or hair care
  • Electric kettle
  • Rice Cooker
  • Electric fan
  • Electric iron
  • Microwave oven
  • Electric grills, toasters and similar portable cooking appliances
  • PVC insulated wires and cables of rated voltages up to and including 450/750V
  • Portable immersion heaters
  • Electric tea and coffee makers
  • Electric hand dryer
• EMC compliance is required for below equipment categories:
  • Instant water heaters
  • Motor operated portable electric drillers
  • Fluorescent lamps with built-in ballasts
  • Electric Vacuum cleaners
  • Electric Washing machines
  • Electric refrigerators and freezers
  • Electric Air-conditioners

Energy Efficiency

Regulatory agency

• Ministry of Industry and Trade

Regulations

• Since 1 January 2013 under the Law on Energy Efficiency and Conservation, producers and importers must apply energy labels for some domestic and industrial appliances that use energy.
• Products approved should be labelled appropriately with the Vietnamese Energy Star logo.

Guidelines

• A local representative is required.

ENERGY LABELLING PROCEDURE

• Sample testing.
• Submission of application, test reports and essential documents.
• Submission of registration to the Ministry of Industry.
• Product labelling.

Applicable product categories

• Industrial equipment – Includes distribution transformers and electric motors.
• Domestic appliances – Includes straight tube fluorescent lamps, compact fluorescent lamps, electronic ballasts, electronic fluorescent lights, air conditioners, refrigerators, washing machines, electric cookers, electric fans and television sets.
• To determine if a particular product is subject to the above regulations, please contact us.

Our services at a glance

• iCertifi has the experience and capability to support manufacturers in attaining compliance with Vietnamese requirements and obtaining the necessary approval.iCertifi can also support manufacturers in obtaining voluntary endorsement labels.

Telecom & Wireless

Regulatory agency

• Ministry of Information and Communications of the Socialist Republic of Vietnam (MIC)

Regulations

• Depending on the product, type approval by certification or DoC is required.
• Testing for type approval should be performed by test laboratories approved and listed by the MIC.
• Products approved or declared should be labelled appropriately with ICT Mark of conformity.

Guidelines

CERTIFICATION PROCEDURE

• Sample testing.
• Submission of application, test reports and essential documents.
• Obtain Certification.
• Product labelling.

DoC PROCEDURE

• Sample testing.
• Submit DoC and essential documents.
• Acknowledgement of DoC.
• Product labelling.

Applicable product categories

Product categories subject to mandatory type approval include:

• Fixed, mobile network elements
• Radio frequency support equipment
• RF transmitters, transceivers, from 9kHz to 400GHz
• Terminal equipment
• Transmission cable
• Transmission Equipment
• Transmitted power greater than 60mW

Product categories subject to standards that may use DoC, or type approval, include:

• Bridges
• Cable connected boxes
• Desktop personal computers
• Firewalls
• Gateways
• Hubs
• Notebook
• Personal digital assistants
• Portable computers
• Routers
• Servers
• Switches

To determine if a particular product is subject to the above regulations, please contact us.